Water-based Gravure Surface Printing Ink
水性凹版表印油墨

Water-based gravure ink for surface printing on films where print quality, block resistance and product compatibility matter.
This grade sits in the Waterborne & Printing Inks range: it is specified from the substrate and the downstream process it must survive — Gravure surface printing; Rewinding & slitting — rather than from a catalogue sheet alone. Grades are qualified on customer material at our Hangzhou application laboratory or on your line, and technical data is released per grade after verification.
Why this grade
- Surface-print position means the ink is the final layer — slip, block resistance and scuff behavior during rewinding and packing are designed in.
- Water-based route reduces solvent load versus solvent surface inks; actual VOC data is disclosed per grade after verification, never assumed.
- Adhesion to treated film surfaces is screened with the corona / surface-treatment level you actually run.
Technical data
| Substrates | PE, OPP/BOPP (surface treated) |
|---|---|
| Printing process | Gravure |
| Solid content | Contact us for technical data |
| Viscosity | Contact us for technical data |
| Drying | Contact us for technical data |
| Block / scuff behavior | Verification available per your rewind and packing conditions |
Figures marked "Contact us for technical data" are released per grade once the substrate, process and end-use are confirmed — we do not publish untested values.
Applications
| Substrates | PE films; BOPP / OPP films; Treated packaging films |
|---|---|
| Process | Gravure surface printing; Rewinding & slitting |
| Typical industries | Packaging & Consumer Goods |
How we qualify it on your line
1. Film & treatment check
Confirm film type and surface treatment level — adhesion is tested against the treatment you run.
2. Print validation
Print speed, drying and rewind tension are tuned on trial; block resistance is checked under wound roll conditions.
3. End-use fit
If the print contacts product or faces migration limits, state the end use — compliance screening applies before any claim.
Frequently Asked Questions
PE films; BOPP / OPP films; Treated packaging films. Substrate choice decides the grade: Surface-print position means the ink is the final layer — slip, block resistance and scuff behavior during rewinding and packing are designed in.
Yes. Send the substrate, process and end-use details and we return the technical data sheet (TDS), safety data sheet (SDS) and a sample for a line trial. Where a performance figure depends on your line, we validate it on your material rather than quoting a generic number.
Email [email protected] with substrate, printing process, line speed and end-use requirements. Quotations are returned within one business day, and trials are arranged at our Hangzhou application laboratory or on your press.
Contact Hywelt
Email: [email protected] (site inbox)
Overseas main: [email protected]
WhatsApp: +86 13216144789
Send substrate, process and end-use details for a quotation — response within 1 business day. English / Spanish / Russian support.