Water-based Gravure Ink for Shrink Sleeve Printing

A shrink sleeve is printed flat and then distorted into shape. The ink has to follow that distortion without cracking, losing opacity or releasing from the film, and it has to survive the heat of the tunnel at the same time.

PETG, PVC and OPS behave differently under the same artwork, so they are treated as separate qualifications rather than one grade with a note.

Where this application fails

How Hywelt approaches it

Products used in this application

ProductRange
Water-based Gravure Ink for Shrink FilmWaterborne & Printing Inks

What we need before quoting

FilmPETG, PVC or OPS, thickness, shrink ratio
TunnelTemperature profile, dwell time, bottle or container shape
PressGravure, cylinder count, line speed, drying capacity
FinishingSleeve forming, seam solvent, rewind and storage conditions

Frequently Asked Questions

Which shrink films can this ink run on?

PETG, PVC and OPS are the substrates covered, each qualified separately. Send the film and shrink ratio and we confirm which grade applies.

Does the print crack at high shrink ratios?

Cracking is a function of ink flexibility against the local shrink ratio. It is checked at the highest-ratio area of your artwork during the trial, which is where the failure would appear in production.

How is adhesion tested after shrinking?

Adhesion is assessed after the sleeve passes through the tunnel at your profile, since tunnel heat is what changes the bond. A trial at a lower temperature would not be representative.

Related pages

Contact Hywelt

Email: [email protected] (site inbox)
Overseas main: [email protected]
WhatsApp: +86 13216144789

Send substrate, process and end-use details for a quotation — response within 1 business day. English / Spanish / Russian support.