Waterborne Baking Coating for Metal Security and Interior Doors
Door panels fail at the edges and around hardware openings before they fail on the face. Cut edges and tight radii take a thinner film and see more condensation, so corrosion starts where the coating is weakest — and a door that rusts at the edge is rejected regardless of how good the face looks.
The coating is therefore matched to the pretreatment and the stoving schedule of your line, because film build and cure are what protect those edges.
Where this application fails
- Edge rust on cut faces and around hardware openings, months after installation.
- Under-cure on heavy sections when the bake window is set for thin panels.
- Colour variation between batches that becomes visible once doors are hung side by side.
How Hywelt approaches it
- Pretreatment level, metal type and bake schedule are collected first; the system is matched to the line rather than the other way round.
- Hardness, adhesion, corrosion and appearance are tested on your pretreated panels at your bake window.
- On-line validation covers film build, cure and colour consistency before supply.
Products used in this application
| Product | Range |
|---|---|
| Waterborne Baking Coating for Metal | Coatings |
What we need before quoting
| Substrate | Cold-rolled steel, galvanised, aluminium; panel thickness and section weight |
|---|---|
| Pretreatment | Degreasing, phosphating or conversion coating actually used |
| Stoving | Temperature and time curve, panel loading, oven type |
| Test standard | Salt spray hours and adhesion method required |
Frequently Asked Questions
Edge protection depends on film build at the edge and the pretreatment beneath it. It is checked on your panels, including cut edges, at the salt-spray duration your specification requires.
Mixed loading changes the effective cure of heavy sections. Share the loading pattern and the oven curve; the coating is selected so the heaviest section still cures inside the window.
Colour is matched to a reference with a stated tolerance, and batch-to-batch consistency is part of the supply agreement rather than left to visual comparison on the line.
Related pages
Contact Hywelt
Email: [email protected] (site inbox)
Overseas main: [email protected]
WhatsApp: +86 13216144789
Send substrate, process and end-use details for a quotation — response within 1 business day. English / Spanish / Russian support.