Waterborne Heat-transfer Adhesive for Footwear

Footwear transfer work fails in predictable places: the toe box after flexing, the edge where the transferred film meets a textured upper, and anywhere the temperature across the last is uneven.

The adhesive has to release from the carrier cleanly and then hold to PU, PVC leather, mesh or textile through flexing and ageing — so the grade is chosen from the upper material and the flex requirement.

Where this application fails

How Hywelt approaches it

Products used in this application

ProductRange
Waterborne Heat-transfer AdhesiveAdhesives

What we need before quoting

Upper materialPU leather, PVC leather, mesh, textile — and surface finish
Transfer stepTemperature per station, pressure, dwell time, carrier
Flex requirementTest method and cycle count at the toe
AgeingStorage and service conditions to be covered

Frequently Asked Questions

Does the transferred film crack at the toe?

Crack resistance at the toe is where footwear transfers most often fail. It is checked by flex testing the finished upper at the agreed cycle count before the grade is released for that construction.

Can it bond to both PU and PVC leather?

PU and PVC leather behave differently and are qualified separately. Send the upper material specification and both can be assessed in one trial programme.

What if press temperature varies across stations?

Multi-station temperature variation is a common cause of inconsistent results. Share the measured temperature per station and the grade is selected for the coldest position, so the whole line runs inside the window.

Related pages

Contact Hywelt

Email: [email protected] (site inbox)
Overseas main: [email protected]
WhatsApp: +86 13216144789

Send substrate, process and end-use details for a quotation — response within 1 business day. English / Spanish / Russian support.